Τι Πρέπει I Do Εάν Το Καύσιμο Pellet Machine Has Different Colors% 3f

                       This situation is relatively rare and mainly manifests itself in the fact that the color of individual particles extruded in an annular shape is darker or lighter than the color of other normal particles, or the surface color of individual particles is inconsistent, which affects the overall appearance quality of the fuel. The main reasons for this phenomenon are as follows: There are returned materials that have been repeatedly granulated in the warehouse to be granulated. The granulated particle materials can become finished materials after being cooled and screened. The screened fine powder and small particle materials often enter the process for re-granulation, usually into the mixer and the granule bin to be made. Since the recycled material is recycled particles, it is unevenly mixed with other raw materials or mixed with recycled materials, sometimes resulting in flakes.

                       The inner wall of the annular aperture has inconsistent roughness. Due to the inconsistent roughness of the die holes of pellet machine manufacturers, the resistance and exrusion pressure experienced by the particles during exrusion are different, and the color changes are also ασυνεπείς. In addition, there are burrs on the wall of the annular hole, which damages the surface when the particles are extruded, and the surface colors of individual particles are different. As can be seen from the above discussion, the causes of these phenomena are multifaceted and are not completely independent of individual each other. Αυτό απαιτεί το τεχνικό προσωπικό του το σφαιρίδιο μηχανή κατασκευαστής να κάνει κάνει περισσότερα ανάλυση%2γ πιάνει το κλειδί στο το πρόβλημα%2γ και λύνει το πρόβλημα πότε αντιμετώπιση με τέτοια προβλήματα σε πραγματική εργασία. I ελπίδα αυτό άρθρο μπορεί βοήθεια εσείς καλύτερα.